Drum-Proof Your Fastenings: A Button Survival Plan for Wash Day
Photo: Bill Ward from El Cerrito, CA, USA, CC BY 2.0, via Wikimedia Commons
Start with a two-minute check
Before anything goes in the drum, give the fastenings a look. Fasten every button. Turn the garment inside out. If a button is already wobbly, sew it now, not after the wash. A loose button in a machine is not a repair job; it is a search-and-rescue operation. Keep a small tin by the machine with a needle, navy and grey thread, and a few spare 15mm buttons.
Mesh bags: not glamorous, genuinely useful
Use mesh laundry bags for small items, delicate knits, and anything with buttons that stand proud. A bag stops the drum from twisting the garment around itself and banging the buttons against the door. Choose a bag large enough that the item can move a little; cramming it in creates new pressure points. Zip or tie the bag closed. For cardigans and light jackets, a pillowcase with the end tied is a decent standby, but mesh is better because water and air move through.
Turn it inside out
Turning a garment inside out protects the button faces from rubbing against other clothes and the drum. It also keeps the buttonhole side from snagging. Do up the buttons, then turn the garment inside out. For coats, empty the pockets, remove belts and detach any hoods or faux-fur trims that are designed to come off. Check the care label. If it says dry clean only, believe it.
Know which buttons loosen fastest
The buttons most likely to suffer are shank buttons, because the shank can be crushed; hollow or domed buttons, because the rim can dent; and any button sewn with a single thread or a loose knot. Two-hole flat buttons are generally sturdier, but they still need a proper thread shank if the fabric is thick. Avoid overloading the machine. A drum packed tight creates friction. Use a wool or delicate cycle for knits, and a lower spin speed where possible.
Drying flat, not draped
Never hang a wet knitted garment by its shoulders; the weight will stretch it, and the buttons will pull at the buttonholes. Roll the garment in a clean towel to remove excess water, then dry flat on an airer or a towel. Keep it away from direct heat such as a radiator. If the buttons are metal, dry them promptly to avoid water marks. If they are shell or corozo, do not soak them longer than necessary.
The post-wash patter
When the wash is done, give each fastening a quick check. Run a finger around the button. Is the thread tight? Is there a loose end? Does the button sit flat? Fasten and unfasten the garment once. If a thread is fraying, secure it with a small knot on the reverse before it becomes a missing button. Keep a note of any button that needs replacing and put it in the repair tin. This small routine catches most problems before they leave the house.
A winter kit by the machine
A mesh bag, a small repair tin, a towel for drying flat, and a few spare buttons by shade. That is the whole kit. It is not glamorous, but it gets coats, cardigans and layered separates through the heaviest washing months. And if a button does disappear, you will know exactly where its replacement lives.